Was this page helpful?

How to configure the DELL PERC H310 RAID controller

Reviewed on 26 August 2024 • Published on 16 July 2021

Before you startLink to this anchor

To complete the actions presented below, you must have:

A Dedibox account logged into the console
A Dedibox dedicated server with a DELL PERC H310 RAID controller

How to install the required packagesLink to this anchor

We recommend you use the packages provided by HWraid to configure your DELL PERC H310 RAID controller. Install them as follows:

Debian 12 (Bookworm)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/debian bullseye main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Debian 11 (Bullseye)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/debian bullseye main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Debian 10 (Buster)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/debian buster main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Debian 9 (Stretch)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/debian stretch main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Unbuntu 20.04 (Focal Fossa)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/ubuntu focal main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Unbuntu 18.04 (Bionic Beaver)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/ubuntu bionic main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

Ubuntu 16.04 (Xenial Xerus)Link to this anchor

sudo echo "deb http://hwraid.le-vert.net/ubuntu xenial main" >> /etc/apt/sources.list
sudo apt update
sudo apt install megaclisas-status

How to check the status of the RAID controllerLink to this anchor

Run the following command to check the status of the DELL PERC H310 RAID controller:

megaclisas-status

An output like the following example displays:

-- Controller information --
-- ID | Model
c0 | PERC H310 Mini
-- Arrays informations --
-- ID | Type | Size | Status | InProgress
c0u0 | RAID0 | 2728G | Optimal | None
c0u1 | RAID0 | 2728G | Optimal | None
-- Disks informations
-- ID | Model | Status
c0u0p0 | SEAGATE ST3000NM0023 GS0FZ1Y25K8M | Online, Spun Up
c0u1p0 | SEAGATE ST3000NM0023 GS0FZ1Y25L0X | Online, Spun Up

How to check the status of the disksLink to this anchor

Run the following command to check the health status of the disks in your RAID:

DEVICE=/dev/sda
for i in $(megacli -pdlist -a0 | grep Id | cut -d":" -f2); do
     echo "============================== $i =============================="
    smartctl -s on -a -d megaraid,${i} ${DEVICE} -T permissive
done